Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PRI Programming MICS

Status
Not open for further replies.
jamie2

jamie2

Programmer
Joined
Jul 26, 2005
Messages
1,127
Location
US
Where do you program the PRI on a MICS system? Particularly, where do you set either NI2 or SL1?

Thanks, mjamm
 
Sort by date Sort by votes
its under Hardware under card 1 or 2 for Module 2. You must have the PRI Enabler Installed. for SLI you must have the MCDN Keycode installed.

NTL555
 
Upvote 0 Downvote
Thanks RikRodgers and NTL555!!!!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
1K
curlycord
curlycord
N
  • Locked
  • Question Question
Need support on dial 9 Nortel MICS PRI When dial 9 display states Invalid number. Incoming DIDS work fine. Been working for years. Provider
Replies
6
Views
1K
Nortel dino
N
jsaad
  • Locked
  • Question Question
Mics losing programming
Replies
3
Views
408
curlycord
curlycord
Don W
  • Locked
  • Question Question
Mics software upgrade tools
Replies
9
Views
894
curlycord
curlycord
jsaad
  • Locked
  • Question Question
MICS GATC going dead
2
Replies
24
Views
2K
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top