PRI on MICS 4.1??????

[519tech]

Hey guys, and gals; I have a MICS 4.1 I am cutting over to PRI today, and was wondering....... If I bring up the system successfully with the PRI, can I then shut it down, and insert a 6.0 or 6.1 software cartridge without problems? Customer has had some glitchy issues, and I thought that an upgrade may solve them. The system ID was retreived with the 4.1, and the enabler is for the same, so I just want to make sure before I go ahead with it. 90+ users, and I can't have any issues. Thanks for any and all returns.

 

[curlycord]

Good to go.

harware then software

Cheers

 

[schoebo]

BE CAREFUL ON HOW U DO IT IF SYSTEM ID CHANGES U R UP SHIT CREEK ON THE ENABLER CODE HAPPEN TO ME ONCE

 

[schoebo]

WHAT EVER U DO IS DO NOT DO A COLD START THAT WELL DO A NEW SYSTEM ID

 

[ptstechnician]

I would suggest leaving the original sleave (v 1.0) when upgrading.

 

[hawks]

Just to let you know 6.0 and all but the last 6.1 also had some issues with PRI. So if you upgrade you need to make sure it was the latest 6.1 rls.

 

[519tech]

Thanks to all. The software is release 1, 6.1 ? What types of issues have you had?

I will use the same sleeve. Thanks.

 

[RikRodgers]

Personally, I've had a customer with calls dropping on 6.1MR that were fixed with an upgrade to 7.1.

I understand, though, there was more than one release of 6.1MR. Mine was probably the earlier release.

 

[curlycord]

6.1 has 3 release's
E06, G05(MR), G10