Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PRI keycode invalid on new MICS 6.1

Status
Not open for further replies.
Geddylee

Geddylee

Vendor
Nov 12, 2004
1
Installed new mics 6.1, keycode retrieval now from website only, recieved keycode from nortel, when entered in ksu comes back as "invalid".
 
Sort by date Sort by votes
I would contact Nortel ITAS and indicate that the keycode you were supplied with came up invalid. They will provide another keycode that will work.
 
Upvote 0 Downvote
I would be getting with Nortel direct on that. ITAS should be able to let you know if your Auth code was corrupt..

The secret of Joy in work is contained in one word- excellence- To know how to do something well is to enjoy it..
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

N
  • Locked
  • Question
Need support on dial 9 Nortel MICS PRI When dial 9 display states Invalid number. Incoming DIDS work fine. Been working for years. Provider 1
Replies
6
Views
1K
Nortel dino
N
P
  • Locked
  • Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
1K
curlycord
curlycord
Rick The Geek
  • Locked
  • Question
PRI Keycode availability
Replies
4
Views
412
Rick The Geek
Rick The Geek
potrocito
  • Locked
  • Question
MICS 6.1 Incomplete CLID after STIR/SHAKEN 2
Replies
2
Views
395
exsmogger
exsmogger
Don W
  • Locked
  • Question
Mics software upgrade tools
Replies
9
Views
763
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top