Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PPP Unnumbered

Status
Not open for further replies.

Highland

MIS
Jul 4, 2001
451
GB
Can someone explain how PPP unnumbered links work...??? Does the IP assigned from the FE interfaces have to be in the same sub-net....???

Thanks...
 
No, the ip unnumbered address just needs to be legal so it is routable, then the serial or ppp interface just uses a def route out of it's interface to route traffic.

So you can refer to any interface on the router - as long as it's legal.
 
Just as an extra...if you assign an address to the Loopback0 interface, that never goes down (unlike a physical interface like fastethernet, serial, whatever) so the address is always available. Then use that as the source of you address for your unnumbered link.
You can give it a 32 bit mask, too, to cut down the number of IP addresses you use up.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top