Guest_imported
New member
- Jan 1, 1970
- 0
computer keeps going to blank screen try to reboot and get message "please check signal". Removing plug from back of system and reboot works for a brief time and shuts off again.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Power source
- Thread starter Guest_imported
- Start date
- Status
check you BIOS power settings too, the bios may be cutting the power without the OS knowing.
Or the OS is using a "power on" code that the montior does not understand (normally Hsync and Vsync signals both together or something)
Or the OS is using a "power on" code that the montior does not understand (normally Hsync and Vsync signals both together or something)
- Status