Hello,
I have a Compaq Evo d500 sff with w2k loaded. Yesterday somone spilled some coffee into the pc. Not much got onto the pc but it was enough to notice when I opened up the case. There was some drops on the motherboard and the extra pci slot. Anyways I dried out the board completely and then put everything back and powered it up. I got power but no display. The nic lights up but cd rom opens but no display. I also did not hear the normal post beeps either. Troubleshooting that route I removed the memory and hard drive to force it to beep but nothing. I even swapped the agp card for a pci card and nothing. No display or post. I think I have narrowed it down to the board (for the no beeps). What do you guys think? Can it be the processor? if so is there a way to see besides taking the processor to another board? I ask because I dont have another pc.
thanks
Comptek
A+, Network+
I have a Compaq Evo d500 sff with w2k loaded. Yesterday somone spilled some coffee into the pc. Not much got onto the pc but it was enough to notice when I opened up the case. There was some drops on the motherboard and the extra pci slot. Anyways I dried out the board completely and then put everything back and powered it up. I got power but no display. The nic lights up but cd rom opens but no display. I also did not hear the normal post beeps either. Troubleshooting that route I removed the memory and hard drive to force it to beep but nothing. I even swapped the agp card for a pci card and nothing. No display or post. I think I have narrowed it down to the board (for the no beeps). What do you guys think? Can it be the processor? if so is there a way to see besides taking the processor to another board? I ask because I dont have another pc.
thanks
Comptek
A+, Network+