PERSONAL CO LINE (FIM)
PREREQUISITE None
NUMBERING PLAN None
CALL PRIVILEGE CONTROL None
INSTALLATION /ASSIGNMENT
Hardware Requirements A B8BWCB / B8BWCC / B8BWCJ card (or equivalent) must beinstalled.
INS PKG, DEL PKG, DIS PKG
Format:
INS PKG,<package no.>,<package name> = B8BWCA
/ = B8BWCB
/ = B8BWCC
/ = B8BWCJ
Trunk Assignment a CO trunk group and trunk port must be assigned. Refer to the CO /FX / WATS Add, Delete, Move, and Change procedure in the Special Commands chapter of this manual.
DT Line Appearance The DT must have already been assigned multi-line appearance in the software data base. If the DT has already been assigned a personal CO line, refer to the DT (Voice Port) Add, Delete, Move, and Change procedure in the Special Commands chapter of this manual.
Change the line appearance if the DT has single line appearance only.
DIS MLDT, CHA MLDT
Format:
CHA MLDT,[<tenant no.>:0],<directory no. of the DT prime
line>,,,,,,,[<line appearance = 1 (multi-line)
/ = 0 (single line)>]
Personal CO Trunk Arrangement
CHA TRK, DIS TRK
Format:
CHA TRK,,<equipment no. of the trunk port>,,,,,
<personal CO service activation = 0 (not activated)
/ = 1 (activated in day and night mode)
/ = 2 (activated in day mode only)
/ = 3 (activated in night mode only)>
Feature Button on DT ASS MLPCL, DEL MLPFB, DIS MLPFB
The personal CO line button must be assigned to a DT. The DT must have already been assigned in the software data base.
Format:
ASS MLPCL,[<tenant no.>:0],<directory no. of the DT prime
line>,<button no.>,<equipment no. of trunk port>,
[<ringing mode = 1 (activated)
/ = 0 (deactivated)>]
TIMING PARAMETER None
FEATURE ACTIVATION /OPTIONS None