Polycom Soundstation2 w/ direct conect & Nortel Meridian option 11c

[seige443556]

I am having difficulty configuring my Soundstation2 to work with my Nortel system. According to Polycom I need to configure the phone as a m2616 which I have done. Now its stuck on initializing. I do not have a 2616 to hook up to it to ensure my configurations are working correctly, however I do have a 3903 hooked up to the interface module and it gets a dial tone.

 

[bad69cat]

Is there a programming guide that came with that polycomm? I never knew they made a nortel compatible one - interesting. I see you don't have any hunting configured - might not make a diff though? Also I am wondering if you need any special CLS enabled? flexible features perhaps? It might be that certain key arrangments have to be datafilled for in order for it to work. Got any 2616's you can copy to that particualr TN and play with? Good luck...

 

[StanleySteamer]

You know what?
I think you might need to program like this:
KEY 2 AO6
KEY 5 TRN

Polycom refers to "button" 3 AO6 and "button" 6 TRN but they are counting from 1 and not 0.

 

[seige443556]

This is the compatibility according to Polycom

SoundStation2 Direct Connect is
compatible with any digital voice port
on NORTEL® Meridian®, Meridian
1 (option 11 to 81), SL-1, or SL-100
PBX with the exception of those supporting
MBS (CENTREX®) phone
sets. In addition to the basic product
functions, it supports two special functions
- Conference and Transfer - in
the same manner as the default M2616
Model 20, using key number position
3 for Conference and key number
position 6 for Transfer. Contact your
PBX Administrator to confirm that the
Conference and Transfer functions at
the port are assigned to these key number
positions.

http://supportdocs.polycom.com/Poly...station2_direct_connect_nortel_user_guide.pdf

 

[StanleySteamer]

Right. And if you were able to look at a "model 20" 2616 set you would likely see
KEY 2 AO6
KEY 5 TRN

Just try it.

 

[seige443556]

I gave it a shot however I still am not getting a dial tone when the power is plugged in. You wouldn't happen to still have the soundstation do you? If so could you post the configurations of it so I can compare?

 

[Firebird Scrambler]

This was what I had programmed up for my customer a couple of years ago.

DES M3310
TN 006 0 00 03
TYPE 2616
CDEN 8D
CUST 0
AOM 0
FDN 7101
TGAR 1
LDN NO
NCOS 7
SGRP 0
RNPG 1
SCI 0
SSU 0010
LNRS 16
XLST 0
SCPW 7112
SFLT NO
CAC_MFC 0
CLS TLD FBD WTA LPR PUD MTD FNA HTA ADD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTA SFA MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUA DPUA DNDD CFXA ARHA FITD CLTD ASCD
ABDD DELD CFHA FICD NAID BUZZ
UDI RCC HBTA AHA IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRA ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD
CPND_LANG ENG
RCO 0
EFD 7101
HUNT 7112
EHT 7101
LHK 0
PLEV 00
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 7112 0 MARP
CPND
CPND_LANG ROMAN
NAME Polycom Conference Room
XPLN 27
DISPLAY_FMT FIRST,LAST
01 AO6
02 RGA
03 ADL 16 7101
04 CFW 4 7119
05 SCC 7112
06 RDL 16 907748382977
07
08
09
10
11
12
13
14
15
DATE 19 MAY 2009

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[bad69cat]

how many models of the 2616 sets are there I wonder? I know there are at least 2 as I have cracked open a few and there are huge differences in the cards on some sets......(I sometimes replace the displays on them)

there are quite a few diff's on the CLS settings between yours and firebirds not to mention he has an SCPW set on it.....you may nul that out.......worth a try