Jul 7, 2011 #1 JHerm Technical User Joined Jun 12, 2008 Messages 36 Location US I cannot get my Polycom IP6000 phone to the point of a log in screen to enter a extension. Any tips?
Jul 7, 2011 #2 mojoputter Technical User Joined Oct 11, 2005 Messages 1,123 Location US Did you staticly assign the IP 6000..? Upvote 0 Downvote
Jul 7, 2011 Thread starter #3 JHerm Technical User Joined Jun 12, 2008 Messages 36 Location US Yes, still nothing. Upvote 0 Downvote
Jul 7, 2011 #4 kwing112000 Vendor Joined Oct 5, 2004 Messages 3,808 Location US Did you go into the phone thru the web browser and configure it there? Kevin Wing ACSS Small and Medium Enterprise (SME) Communications ACS- Implement IP Office ACA- Implement IP Office Carousel Industries Upvote 0 Downvote
Did you go into the phone thru the web browser and configure it there? Kevin Wing ACSS Small and Medium Enterprise (SME) Communications ACS- Implement IP Office ACA- Implement IP Office Carousel Industries
Jul 7, 2011 Thread starter #5 JHerm Technical User Joined Jun 12, 2008 Messages 36 Location US kwing, i have not tried that. I will try that next. Upvote 0 Downvote
Jul 8, 2011 #6 phoneguy55 Programmer Joined May 25, 2005 Messages 2,607 Location US You have a SIP server right? http://www.polycom.com/products/voice/interoperability/platform_compatibility.html Upvote 0 Downvote
You have a SIP server right? http://www.polycom.com/products/voice/interoperability/platform_compatibility.html