Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Polycom 6000
- Thread starter Bjohansen
- Start date
If you put the IP address of the polycom into a browser it'll let you configure the device via GUI.
Username is Polycom
Password (default) is 456
Under the General section select Time, you can set the unit to sycronize with a SNTP server.
Hope this helps.
Username is Polycom
Password (default) is 456
Under the General section select Time, you can set the unit to sycronize with a SNTP server.
Hope this helps.
- Status
Similar threads
