Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pointing ISDN30 to a TVP200 1

Status
Not open for further replies.

tesleeds

Technical User
Jan 10, 2003
37
GB
I have a KXTD1232 with 8 x ISDN30 channels which are working fine.
Presently they are set to ring on DIL 1.N to several extensions.

I have set up the TVP system to Custom Service Setting in Day Service.
This part has been tested, ok.

However, I want to point all the 8 channels of this main number to the TVP100 >265.
Normally I would use the DIL 1.1(Prog 407). But as the ISDN30 lines are numbered CO 25 - CO32. And the programme 407 only offers up to 24 lines, is there another way to do this?
 
you could at least intercept route by trunk group
that would get you to top menu with a few rings

 
Look at the CO reference No in prog 451
Then DIL1:1 this CO No. to the VM extn

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top