Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PLEV Primer? 3

Status
Not open for further replies.

captnamo

Technical User
Feb 2, 2006
226
US
I notice that some of my phone sets are PLEV 00 and some are PLEV 02. None are ACD sets.

So, PLEV = Intrusion Priority Level, but what does it do and does it really matter (to the next 20 sets I need to build)?
 
I think that goes back to AUTOVON days where if a Sergent was on the phone and a General wanted to make a call, but no lines were available, his call would kill the Sergent's call.

Find more at GHTROUT.com
 
Agree, in the UK, we tend to try and always make the PLEV value "0", but it was a prompt that in effect had little meaning and wasn't of much use.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Any idea which would have priority, 0 or 2?
 
PLEV 0-(2)-7 Priority Level, prompted with Priority Override/
Forced Camp-On (POVR) package 186 or
Enhanced DPNSS1 Services (DPNSS_ES)
package 288
povr-20
2 = set can override sets of level 1 and 2, and
can be overridden by sets of level 2-7
 
Thanks to all. You guys are the BEST! [medal]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top