pix vpn to multiple subnets

[fenstrat]

We are using a Netscreen firewall, on one side, and a pix firewall on the other. We have successful traffic from one subnet on our network to one subnet on their network. To allow another subnet to pass communications on the netscreen, you just add another policy to the vpn to allow that subnet. On the other side with the pix they don't know if it is possible to allow multiple subnets to pass, or how to do it. Does anyone have an answer to this, is this possible with these two products.
Thanks

 

[yizhar]

HI.

The pix can do it, but proper routing and access-list should be setup at both peers, and also at internal routers along the path if needed.

Bye
Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar