Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PIX Failover
- Thread starter lardum
- Start date
- Thread starter
- #3
I did, but there is no info about this being RESTRICTED or UNRESTRICTED.
This is the info:
Cisco Secure PIX Firewall Version 5.1(4)
Compiled on Mon 02-Oct-00 07:19 by morlee
Finesse Bios V3.3
pixfirewall up 33 days 1 hour
Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz
Flash AT29C040A @ 0x300, 2MB
BIOS Flash AM28F256 @ 0xfffd8000, 32KB
0: ethernet0: address is 0090.27af.4296, irq 11
1: ethernet1: address is 0090.27af.49cf, irq 10
Licensed connections: 128
Serial Number: XXXXX
Activation Key: XXXXX
Any ideas?
This is the info:
Cisco Secure PIX Firewall Version 5.1(4)
Compiled on Mon 02-Oct-00 07:19 by morlee
Finesse Bios V3.3
pixfirewall up 33 days 1 hour
Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz
Flash AT29C040A @ 0x300, 2MB
BIOS Flash AM28F256 @ 0xfffd8000, 32KB
0: ethernet0: address is 0090.27af.4296, irq 11
1: ethernet1: address is 0090.27af.49cf, irq 10
Licensed connections: 128
Serial Number: XXXXX
Activation Key: XXXXX
Any ideas?
AlanRamsay
IS-IT--Management
As it only allows 128 connections, it is probably restricted
Alan
Alan
- Status
Similar threads
- Locked
- Question
- Locked
- Question