PIX 7 access-list removal

[BuckWeet]

Has anyone run into this issue yet?


I want to remove an access-list totally, before pix 7 you coul do 'no access-list (acl name)' and that would wipe it totally..


Now with PIX 7, that doesn't work. It seems you have to clear each line out.. Now imagine if you had a 25000 line ACL, what a pain that would be.


Any ideas?

BuckWeet

 

[tbissett]

The 7.0 command is:
clear configure access-list <access-list name>

Just in case you haven't seen the doc, this is documented on Page 9 in the "Guide for PIX 6.2 and 6.3 Users Upgrading to Cisco PIX Software Version 7.0' document, which is actually a pretty good read overall:

http://www.cisco.com/univercd/cc/td...x/pix_sw/v_70/pix_upgd/pixupgrd.htm#wp1471801