PIX 6.3 VPN client routing

[krismorrison]

I am having issues with some vpn routing, see diagram below.

pixvpnclient-->internet-->pix515-->LAN 1--->2600-->LAN2

The vpn clients work and can access everything in LAN1, but cannot access anything on LAN 2.

How would I go about getting the vpn traffic to access LAN2?

Thanks

Kris

 

[Supergrrover]

You would need to post a config to be sure, but adding an inside route should do it (ACLs and such aside.)

http://www.cisco.com/warp/public/110/19b.html

Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[horus42]

You also need to make sure that LAN2 segment's gateway knows how to get to the VPN clients block

Hope that helps