Pix 506E Port opening for Azureus

[Tomy1965]

First let me start of by saying that as far as a pix I am a total newbie. I am trying to open port 6881 so I can run the bit torrent program call Azureus.

Here is the command I think I have to enter on my pix
I log into the pix with hyperterminal
enable

and type the following 2 lines.

access-list acl_outside permit tcp any host 209.xxx.xxx.xxx eq 6881

static (inside, outside) tcp interface 6881 192.168.1.xxx 6881 netmask 255.255.255.255 0 0

First am I typing the command lines in the proper area, and are the 2 lines correct.

Thanks for any help

 

[KiscoKid]

Yes that seems alright. Just verify there is an access group called acl_outside assigned to the outside interface (show access-group)