Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PHONE STRAIGHT TO VM

Status
Not open for further replies.

mhodges

Technical User
Mar 6, 2008
142
US
This should be an easy one. I promise I will write it down.

How do I make a DN go straight to VM rather than ringing 4 times.

THANK YOU IN ADVANCE!!! Mary
 
There are several ways:

1. Add a CFW key on the phone, and enable it with the voice mail as the target.

2. Build the DN as a phantom TN and set the DCFW to the voice mail.

3. Build the DN as an ACD with Maxp=1, and NCFW set to the voice mail.

Personally, I prefer option 2.
 
OK AM I MISSING IT. I LIKE OPTION 2 TOO BUT I AM NOT SEEING THE DCFW. Is it here & I am missing it? Do I add it as a key? YOU ALL ARE THE BEST!!! Mary


REQ: prt
TYPE: tnb
TN 020 0 4 2
DATE
PAGE
DES

DES 7604
TN 020 0 04 02
TYPE 3904
CDEN 8D
CTYP XDLC
CUST 0
FDN 4300
TGAR 0
LDN NO
NCOS 6
SGRP 0
RNPG 2
SCI 0
SSU 0000
LNRS 16
XLST
SCPW
CLS CTD FBD WTA LPR PUA MTD FNA HTA TDD HFA GRLD CRPD STSD
MWA LMPN RMMD SMWD AAD IMD XHD IRA NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFA MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUA DPUA DNDA CFXA ARHA FITD CLTD ASCD
CPFD CPTD ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
CDMR
CPND_LANG ENG
RCO 0
HUNT 4300
LHK 1
LPK 5
PLEV 02
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 7610 0 MARP
01 SCN 87604 0
02 ADL 16
03 ADL 16
04 ADL 16
05 ADL 16
06 ADL 16
07 ADL 16
08 ADL 16
09 ADL 16
10 ADL 16
11 ADL 16
12
13
14
15
16 MWK 4300
17 TRN
18 AO6
19 CFW 4
20 RGA
21 PRK
22 RNP
23 SCC 0032
24 PRS
25 CHG
26 CPN
27 CLT
28 RLT
29
30
31
DATE 23 OCT 2008


 
Option 2: you will only be able to use DCFW on a phantom which is analog, your best bet is to CHG, KEY 19 to CFW 4 4300
 
This isnt a real phone. It is just a DN & a TN. There is nothing to forward. It looks like for 4 rings, not one though. Wouldnt it be 19 cfw 1 4300? I tried the 19 cfw 4 4300 and I got sch 0356 error.
 
If it is not a real phone, then out the phone, and rebuild it as either a phantom TN, or ACDN.

the format for the CFW key is: key 19 cfw x y, where x is the number of digits allowed to be entered and y is the dialable dn of the target. This allows you to restrict the number of digits a user can enter to prevent them from forwarding their phone offsite for example.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top