gordonclark
IS-IT--Management
argent swapped out for ip office and call status works but phone manager wont find unit- any ideas welcome !
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
phone manager wont find unit
- Thread starter gordonclark
- Start date
- Status
Silly question , but which Phone Manager are you using.
Older Alchemy version will NOT work with IP Office Systems.
If you are using the IP Office Version and you have supplied the unit's IP address in the PBX menu option then your user list will appear.
Older Alchemy version will NOT work with IP Office Systems.
If you are using the IP Office Version and you have supplied the unit's IP address in the PBX menu option then your user list will appear.
- Thread starter
- #4
gordonclark
IS-IT--Management
the software was from the CD sent with the unit, but I have found out that call status relies on the tcp/ip whereas phone manager uses tcp/ip plus it also uses TFTP, changing the firewall settings solved this one...thanks for the replies, hope this helps you if you get the same fault. Gordon Clark
- Status