Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Phaser 350 - Can anybody tell me the reason for this particular fault?
- Thread starter tradenet
- Start date
GuillermoS
Technical User
15.001.42 means the drum thermistor appears to be open.
Replaced the drum temperature sensor
Replaced the drum temperature sensor
Cycle Power
Turn the printer off, wait approximately 30 seconds and then turn the power back on.
Found this on the Xerox website @
Turn the printer off, wait approximately 30 seconds and then turn the power back on.
Found this on the Xerox website @
- Status
Similar threads
- Locked
- Question
