Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PCL for bar code
- Thread starter RP001
- Start date
- Thread starter
- #3
Thanks Jim for your info.
I am using a Lexmark T630 laser printer which supports code 3 of 9 bar code. Sending a *12345* prints exactly the same. I thought there would be some PCL code to say print code 3 of 9 for "12345" which will print "12345" in bar code format.
Am I on the right path?
I am using a Lexmark T630 laser printer which supports code 3 of 9 bar code. Sending a *12345* prints exactly the same. I thought there would be some PCL code to say print code 3 of 9 for "12345" which will print "12345" in bar code format.
Am I on the right path?
If the Lexmark truly has a 3of9 font built in, then you
will have to print out a typeface listing to find the
correct escape sequence to enable the font. You will have to refer to the manual to see how you get the listing.
I would enable the barcode as a secondary font and jump to it when the barcode field is to print. If necessary, you could add the *'s when you make the font switch.
As to whether or not the printer will add the *'s, I couldn't say. Check the manual, or better yet a test should be enlightening.
Jim Asman
jlasman@telus.net
will have to print out a typeface listing to find the
correct escape sequence to enable the font. You will have to refer to the manual to see how you get the listing.
I would enable the barcode as a secondary font and jump to it when the barcode field is to print. If necessary, you could add the *'s when you make the font switch.
As to whether or not the printer will add the *'s, I couldn't say. Check the manual, or better yet a test should be enlightening.
Jim Asman
jlasman@telus.net
mansi - probably not. the 3 0f 9 bar code font is probably not an internal font if it is an older model printer. Can you get the printer to print a pcl font list? It is usually in the test menu near print test page. If it is not on the list you will have to download it (assuming the printer supports any of these) or get a font cartridge etc.
If it is printed on the font list a symbol set ID is also usually printed. That is one of the things you need to define the font.
have fun,
If it is printed on the font list a symbol set ID is also usually printed. That is one of the things you need to define the font.
have fun,
- Status
Similar threads
- Locked
- Locked
- Question
- Locked
- Question