I do a newsletter of 16 pages every month. The articles are given to me in Word. When I copy and paste them into Pagemaker 7.0 I get what looks like a text wrap line at the bottom of the article at the drag point. My printer has complained about this. Is there a way to correct it?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pasting windows articles into Pagemaker 7.0
- Thread starter z5600
- Start date
I would never copy/paste Word articles into PM. I would always use File>Place, and in addition, save the Word doc as a text file before placing and apply all formatting in PM. Word brings in styles which can conflict with styles within PM (and possibly cause corruption) and also brings in an RGB black ('Auto' in the Color palette) which if the newsletters are being offset printed, can cause more problems.
BionicJohn
Technical User
Hi, z5600,
It is well known that copy/pasting Word docs directly into PM will cause problems, particularly when style names clash.
You can only 'import' the text from a Word document - no graphics, no backgrounds.
To get the graphics from the Word document into PM:
If you have a graphic in a Word document you want to put into your PM doc, and depending on whether it is a vector (e.g. WMF) or raster (e.g. JPG) export it from Corel Draw as an EPS or TIFF respectively. This method will retain all the pixel data that was in the original graphic, where pasting into Photoshop/Illustrator or PM itself will not.
To get the text from the Word document:
1. Save it as a TXT file, then place it into PM. Unlink the TXT file from the PM doc via the Links Manager.
2. Save the text from Word as rich text format (.RTF) then use File>Place to get it into PM. Make sure you immediately delete the link to the Word doc in the Links Manager, otherwise problems next time you open the PM file as it will look for that RTF file - bad news if you have made changes to the text in PM.
Note: Saving in RTF or TXT formats strips out the Word styles. The former however retains all bolding and italicising, the latter does not.
3. Copy and paste the text into a brand new PM doc, highlight all the text and on the Styles palette, click on the [No Style] option. Then recopy the text and paste it into your existing PM doc and apply PMs styles. (Don't save the PM doc where you applied the [No Styles]).
Remember, it is far better to apply styles using PM than to bring in Word styles.
4. When you are in the "Place" dialogue box, try checking "read tags." This will prevent the Word document from importing its own styles into your document.
-- With thanks to Lyn Eggleston and Phil Peterson
LIVERPOOL FC - 5 times Champions of Europe. 1977, 1978, 1981, 1984, 2005.
Iechyd da! John
Glannau Mersi, Lloegr.
It is well known that copy/pasting Word docs directly into PM will cause problems, particularly when style names clash.
You can only 'import' the text from a Word document - no graphics, no backgrounds.
To get the graphics from the Word document into PM:
If you have a graphic in a Word document you want to put into your PM doc, and depending on whether it is a vector (e.g. WMF) or raster (e.g. JPG) export it from Corel Draw as an EPS or TIFF respectively. This method will retain all the pixel data that was in the original graphic, where pasting into Photoshop/Illustrator or PM itself will not.
To get the text from the Word document:
1. Save it as a TXT file, then place it into PM. Unlink the TXT file from the PM doc via the Links Manager.
2. Save the text from Word as rich text format (.RTF) then use File>Place to get it into PM. Make sure you immediately delete the link to the Word doc in the Links Manager, otherwise problems next time you open the PM file as it will look for that RTF file - bad news if you have made changes to the text in PM.
Note: Saving in RTF or TXT formats strips out the Word styles. The former however retains all bolding and italicising, the latter does not.
3. Copy and paste the text into a brand new PM doc, highlight all the text and on the Styles palette, click on the [No Style] option. Then recopy the text and paste it into your existing PM doc and apply PMs styles. (Don't save the PM doc where you applied the [No Styles]).
Remember, it is far better to apply styles using PM than to bring in Word styles.
4. When you are in the "Place" dialogue box, try checking "read tags." This will prevent the Word document from importing its own styles into your document.
-- With thanks to Lyn Eggleston and Phil Peterson
LIVERPOOL FC - 5 times Champions of Europe. 1977, 1978, 1981, 1984, 2005.
Iechyd da! John
Glannau Mersi, Lloegr.
- Status
Similar threads
- Locked
- Question