Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Passing CID to analog POTS devices: 1

Status
Not open for further replies.
tconn

tconn

IS-IT--Management
Nov 30, 2001
93
US
I need to pass caller ID down the analog line to a POTS CID phone. Do I need special hardware ? running CM1.3 or R11...

I'm using TN793 cards.

Thanks
Tim
 
Sort by date Sort by votes
It should work (I think) if you program the analogue set as type callrID. I think you need TN2793B cards, though.

Paul Beddows

Avaya Consulting, Implementation, One on One EAS & Definity Training for PBX Administrators.

Vancouver, Canada
E-mail avaya@vancouver.hm
 
Upvote 0 Downvote
Actually, I just checked, a TN793 is OK as long as its issue B.

Paul Beddows

Avaya Consulting, Implementation, One on One EAS & Definity Training for PBX Administrators.

Vancouver, Canada
E-mail avaya@vancouver.hm
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

R
  • Locked
  • Question
G450 Analog-test command
Replies
0
Views
388
Red19
R
Traveler74
  • Locked
  • Question
how to activate and deactivate MTC on an analog phone in Avaya CM?
Replies
1
Views
390
AvayaTier3
AvayaTier3
telm59
  • Locked
  • Question
Analog caller ID
Replies
1
Views
456
dialtonebone
dialtonebone
Jasmin Rbr
  • Locked
  • Question
unable to delete Avaya ANALOG extension from ASA/CM
Replies
3
Views
457
Wanebo
Wanebo
jjenuine
  • Locked
  • Question
CM10.0> Internal CID not working on a few phones - sorta
Replies
0
Views
283
jjenuine
jjenuine

Part and Inventory Search

Sponsor

Back
Top