Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Paging over phone speakers 1

Status
Not open for further replies.

chicagotechsolutions

Technical User
May 31, 2005
71
US
I'm installing an IPO Small Office Edition in my house and was wondering if there is a way to page over the phone speakers such as 6408d's and the 2410s (similar to merlin legend 799 code) without needing to install a separate paging system.

Thanks
 
Easy-just set up a hunt group with vm and q'ing off.
The type should be group.
Add the phones you want paged as members.
Then create a short code-use 799 if you like,with the feature being Dial Paging.
Save config and dial 799 from any phone.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top