Paging over IP phones with Application Gateway 2000

[TelTech11]

Can you have IP phones from different pbxs, register and and then page each other with only one Apllcation Gateway 2000 in your network? Or do you need to cluster numerous App Gtwy 2000?

PBX: 2 x Rls 4.50,
PBX: 1 x RLs. 5.00 W

Phones:
i2004
i2002
1140E

 

[Tman45]

Ummmm ... I am thinking that you need a different device (can't recall what it is named) as I don't believe the Application Gateway does paging. I will have to look around to see if I can find what device I am thinking of.

 

[gwebster]

Application Gateway 2000 does paging through the speakers of the IP Phones as well as SIP speakers (see

http://www.nortel.com/voiceoffice).

 

[TelTech11]

Trying to figure out why existing ip sets derigester from the Application Gateway 2000 after adding/registering new ip sets from another site.

 

[TelTech11]

I do not seem to have problems wiht 1140E phones ever deregistering. Only i2002 phones.

 

[TelTech11]

I do not seem to have problems with 1140E phones ever deregistering. Only i2002 phones.

 

[Tman45]

Do you have different IP scopes? Could be that you are simply out of IP's to be assigned in the scope.

 

[TelTech11]

Looks like VLAN configuration setting was a little different at one site and was not allowing the phones to register. Once this setting was changed we could now register sets at will.