Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PABX siemens 4000v5

Status
Not open for further replies.

dreb20

Technical User
Feb 26, 2019
103
0
16
PH
Hi anyone can you help me.. how to resize or change size or can you tell me how to get this logs
im using command sta-hista.
or is there a way to get same as sta-hista logs not on via command? thank you. im not familiar on web base on hp4k thanks

PBX Logs size was larger than usual as a result failed to extract the complete PBX Logs

sample logs
STA-HISTA:SEARCHB,2024-04-17/00:00,;
H500: AMO HISTA STARTED
H1: 01430 ERROR MESSAGES FOUND

F5749 E8 N4194 NO ACT BPA BOARD LW REQUEST 24-04-18 18:02:51
ALARM CLASS:CENTRAL:002
P902:LTG1 :LTU18:008: 00 : 0 Q2324-X500 STMI4/1 BST:01 PLS:-11
FORMAT:43
REASON:00H ONLY SIGNALING
MSG_IP_LINK_FAILURE
4576656E74436F64653A204D53475F49 505F4C494E4B5F4641494C5552452020
202053657665726974793A204D616A6F 72FFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

F5749 E8 N4193 NO ACT BPA BOARD LW REQUEST 24-04-18 17:34:08
ALARM CLASS:CENTRAL:002
P205:LTG1 :LTU3 :004: 00 : 0 Q2324-X500 STMI4/1 BST:01 PLS:-10
FORMAT:43
REASON:00H ONLY SIGNALING
SENTA_NOK_UPGRADE_REQ
 
What do you want the logs for ?

The one error message that I can see is that you have to update the loadware on your STMI cards.
 
Hi,

they said only PBX Logs size was larger than usual as a result failed to extract the complete PBX Logs

fyr please see details below HISTA
or if possible to change the size of entries it almost to the max.thank you
REG-HISTA;
H500: AMO HISTA STARTED
ADD-HISTA: 2500,DEACT ;
ACTIVATE-HISTA:DEACT ;
CHANGE-HISTA:STALARM,DEACT ;

AMO-HISTA-111 READ HTS HISTORY FILE
REGENERATE COMPLETED;
<sta-hista
RTYPE = ;
STA-HISTA:;
H500: AMO HISTA STARTED
+---------+-----+-----------+--------+-------------------------+
I ALARM I ABS I ALARM I ALARM I ALARM NAME I
I GROUP I I NUMBER I PRIO I I
+---------+-----+-----------+--------+-------------------------+
I CENTRAL I BPA I 002 I MAJOR I LTU_FAILURE I
+---------+-----+-----------+--------+-------------------------+
I CENTRAL I BPA I 033 I MAJOR I BAD IP CONNECTIVITY I
+---------+-----+-----------+--------+-------------------------+
I CENTRAL I BPA I 038 I MAJOR I CC-AP UNAVAILABLE I
+---------+-----+-----------+--------+-------------------------+
I SWU-PER I BPA I 004 I MINOR I DIGITAL_VOICE_DEVICES I
+---------+-----+-----------+--------+-------------------------+

AMO-HISTA-111 READ HTS HISTORY FILE
START COMPLETED;
<dis-hista;
DIS-HISTA;
H500: AMO HISTA STARTED
DIRECTORY SIZE: 2500 KB
NO. OF ENTRIES 3822
OLDEST ENTRY 2024-04-06 13:57
LATEST ENTRY 2024-04-19 09:43
FILE STATUS
ALARMING BY HISTO-FILE OVERFLOWF : DEACT
HW-ERROR-STATISTIC: FROM 1000 ENTRIES 933 THRESHOLD REACHED
HWES-TABLE: FROM 1000 ENTRIES 1000 OCCUPIED
SW-ERROR-STATISTIK: 87 ENTRIES AVAILABLE
STATISTIC-ALARMING: DEACT
STATISTIC-STATE: ACT
 
The HISTA can be made larger but you will lose all current entries.
DEL-HISTA;
ADD-HISTA:10000,DEACT;
 
Hi Sbcsu,

Thanks..By the way what is the problem below details
HW-ERROR-STATISTIC: FROM 1000 ENTRIES 933 THRESHOLD REACHED
HWES-TABLE: FROM 1000 ENTRIES 1000 OCCUPIED
SW-ERROR-STATISTIK: 87 ENTRIES AVAILABLE

Thank You
 
Hardware Errors that are repeating over and over.
Bring your system up to the latest hot fixes/loadware/csta/platform etc. fixes then these issues will be minimized
 
Hi SBCSU,

Thank you.. this is hipath 4000V5, which is end of life system. i dont know if software,loadware or latest patch is dowloadable on portal.

thank you..
 
Hi Dreb - yes you can still download all the hotfixes and patches for V5 on the portal
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top