Hi guys, I did a search and only saw one related thread "Tie Trunks Looped" with one response that they may have been conferenced and not released or call forwarded to 9 and not released.
I seem to have too many to blame on conference calls or call forwarding and they are locking up my channels until I disable one of the channels and the other becomes IDLE.
Rather than trying to fix my looped problem (although I'm open to suggestions) can someone explain the LD 80 trace report?
I don't understand how a conference call wouldn't show the second party number, or the originating DN.
So Phone "A" dials 9-1-440-XXX-XXXX (Outgoing loop 202 channel 13) and then presses CONF, dials 9-1-XXX-XXX-XXXX and conferences the two parties together.
Wouldn't I see a separate trace line DIAL DN for let's say Loop 202 Channel 16 with 9-1-XXX-XXX-XXXX ? Why am I not seeing Phone "A" DN like this normal trunk call -
.trad 202 15
ACTIVE TN 202 15 IPMG 000 0
ORIG TN 020 1 01 13 IPMG 020 1 KEY 0 SCR MARP CUST 0 DN 72708 TYPE 3904
VGW TN 020 1 11 18
FAR-END H.323 SIGNALLING IP: 10.13.3.136
FAR-END MEDIA ENDPOINT IP: 10.13.4.65 PORT: 5428
FAR-END VendorID: Not available
TERM TN 202 15 IPMG 000 0 V PHYSICAL TN 000 0 00 05 TIE RMBR 5 15 OUTGOING TRUNK CALL
DIAL DN 91330XXXXXXX
MAIN_PM ESTD
TALKSLOT ORIG 78 TERM 28 JUNCTOR ORIG0 TERM0
EES_DATA:
NONE
QUEU NONE
CALL ID 0 1823
These are outgoing trunks only, no DID coming in and then connected to an outbound trunk.
How are two trunks BOTH connected to the same DIAL DN?
I'm assuming CALL ID 0 is referring to Customer 0? Is the next number simply a reference number or transaction number 3238, or 10554?
Thanks in advance for any insight.
.trad 202 16
ACTIVE TN 202 16 IPMG 000 0
ORIG TN 202 13 IPMG 000 0 V PHYSICAL TN 000 0 00 00 TIE RMBR 5 13 OUTGOING TRUNK CALL
TERM TN 202 16 IPMG 000 0 V PHYSICAL TN 000 0 00 00 TIE RMBR 5 16 OUTGOING TRUNK CALL
DIAL DN 91440XXXXXXX
MAIN_PM ESTD
TALKSLOT ORIG 14 TERM 15
EES_DATA:
NONE
QUEU NONE
CALL ID 0 3238
PDCA 1 PAD 0 0 PCML MU MU
PDCA 1 PAD 0 0 PCML MU MU
.trad 202 17
ACTIVE TN 202 17 IPMG 000 0
ORIG TN 202 14 IPMG 000 0 V PHYSICAL TN 000 0 00 00 TIE RMBR 5 14 OUTGOING TRUNK CALL
TERM TN 202 17 IPMG 000 0 V PHYSICAL TN 000 0 00 00 TIE RMBR 5 17 OUTGOING TRUNK CALL
DIAL DN 91330XXXXXXX
MAIN_PM ESTD
TALKSLOT ORIG 4 TERM 8
EES_DATA:
NONE
QUEU NONE
CALL ID 0 10554
I seem to have too many to blame on conference calls or call forwarding and they are locking up my channels until I disable one of the channels and the other becomes IDLE.
Rather than trying to fix my looped problem (although I'm open to suggestions) can someone explain the LD 80 trace report?
I don't understand how a conference call wouldn't show the second party number, or the originating DN.
So Phone "A" dials 9-1-440-XXX-XXXX (Outgoing loop 202 channel 13) and then presses CONF, dials 9-1-XXX-XXX-XXXX and conferences the two parties together.
Wouldn't I see a separate trace line DIAL DN for let's say Loop 202 Channel 16 with 9-1-XXX-XXX-XXXX ? Why am I not seeing Phone "A" DN like this normal trunk call -
.trad 202 15
ACTIVE TN 202 15 IPMG 000 0
ORIG TN 020 1 01 13 IPMG 020 1 KEY 0 SCR MARP CUST 0 DN 72708 TYPE 3904
VGW TN 020 1 11 18
FAR-END H.323 SIGNALLING IP: 10.13.3.136
FAR-END MEDIA ENDPOINT IP: 10.13.4.65 PORT: 5428
FAR-END VendorID: Not available
TERM TN 202 15 IPMG 000 0 V PHYSICAL TN 000 0 00 05 TIE RMBR 5 15 OUTGOING TRUNK CALL
DIAL DN 91330XXXXXXX
MAIN_PM ESTD
TALKSLOT ORIG 78 TERM 28 JUNCTOR ORIG0 TERM0
EES_DATA:
NONE
QUEU NONE
CALL ID 0 1823
These are outgoing trunks only, no DID coming in and then connected to an outbound trunk.
How are two trunks BOTH connected to the same DIAL DN?
I'm assuming CALL ID 0 is referring to Customer 0? Is the next number simply a reference number or transaction number 3238, or 10554?
Thanks in advance for any insight.
.trad 202 16
ACTIVE TN 202 16 IPMG 000 0
ORIG TN 202 13 IPMG 000 0 V PHYSICAL TN 000 0 00 00 TIE RMBR 5 13 OUTGOING TRUNK CALL
TERM TN 202 16 IPMG 000 0 V PHYSICAL TN 000 0 00 00 TIE RMBR 5 16 OUTGOING TRUNK CALL
DIAL DN 91440XXXXXXX
MAIN_PM ESTD
TALKSLOT ORIG 14 TERM 15
EES_DATA:
NONE
QUEU NONE
CALL ID 0 3238
PDCA 1 PAD 0 0 PCML MU MU
PDCA 1 PAD 0 0 PCML MU MU
.trad 202 17
ACTIVE TN 202 17 IPMG 000 0
ORIG TN 202 14 IPMG 000 0 V PHYSICAL TN 000 0 00 00 TIE RMBR 5 14 OUTGOING TRUNK CALL
TERM TN 202 17 IPMG 000 0 V PHYSICAL TN 000 0 00 00 TIE RMBR 5 17 OUTGOING TRUNK CALL
DIAL DN 91330XXXXXXX
MAIN_PM ESTD
TALKSLOT ORIG 4 TERM 8
EES_DATA:
NONE
QUEU NONE
CALL ID 0 10554
