churchadmin
IS-IT--Management
I want all out going calls to display a main number,, not a DID... can you help?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
outgoing display number--- NEC 2000 IVS 1
- Thread starter churchadmin
- Start date
- Status
-
1
- #2
If this is ISDN PRI set CM 3034>XXX>05 where XXX = the B channel trunk number. DO NOT set this CM for the DCH trunk which is typically the 24th one.
Then use CM 5005>05>number to display (10 digits).
Then make sure CM 1212 and CM 1213 are not set for any station in the system.
Then use CM 5005>05>number to display (10 digits).
Then make sure CM 1212 and CM 1213 are not set for any station in the system.
- Status