Outbound calls using Norstar MCDN? 1

[Norstarguy]

I have a customer with a remote site they're interested in networking to their main location.

I was wondering if it was possible to eliminate the need for a 2nd circuit at the remote site, if it was possible for the remote to pull dialtone from the main site for outbound access.

Anyone tried to do this before?

NG

 

[senk1s]

i'vent done it on a norstar - but that is doable for sure

except for 911 regulations

 

[Norstarguy]

That was a quick response, senk1s. Thx!

If someone that has done it on a norstar can give me some idea how it's done I'd appreciate it!

 

[senk1s]

there was a thread/ FAQ by mroberts about networking norstars and centralized voicemail a while back ...

that should give good direction for ur requirement as well

 

[Norstarguy]

Agreed, the FAQ was a big help on setting up station to station dialing, however I don't believe it had anything in there about making outbound calls across the point to point from the remote system thru the central system.

 

[hawks]

You need to build a Remote Package and assign it to the INBOUND and OUTBOUND trunks that you want to allow them to use.
1-Build Restriction Filter
2-Add Filter to Remote Package
3-Assign Remote Package to Lines

 

[Norstarguy]

Thx hawks. I'll give it a shot when the time comes!

NG