option 61c I have to reboot to get t-1s up

[scanjet]

I can not disable or enable in ld 32 if I stat the loops (22,23) they show diabled.if I reboot the switch every thing comes up fine.

 

[acewarlock]

MagnaRGP Email me at (whaglund at netscape dot com)




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[scanjet]

the system would freeze on the switch over at midnight thus having to INI the switch.Replaced both cmdus with new ones and the problem was resolved

 

[acewarlock]

Turn off the switch over until you find out what is wrong.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[PhoneGuyy]

I was going to say that it sounded like you had processor problems and to replace the cpu's

 

[tnphoneman]

This is a far cry from having to reboot the switch to get T1's to come up. It is the simple things that will get you every time.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.