Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

option 61c I have to reboot to get t-1s up

Status
Not open for further replies.

scanjet

Technical User
Feb 24, 2004
231
US
I can not disable or enable in ld 32 if I stat the loops (22,23) they show diabled.if I reboot the switch every thing comes up fine.
 
Have D Channels?

ld 96 dis dch XX

****

ld 60 disl XX

enll XX

Dch will establish - if good - DTA023

if not, the dreaded DTA030 !

Mato' Was'aka
 
yes ld 60 will not reset loops sorry I do not know why I said ld 32
 
What is the error you are getting when you try to dis/enl the loops??
 
ld 60
lcnt
return

might be your taking hits, that stops the enll command.. rcnt resets your counters.. of course an ini resets them as well

john poole
bellsouth business
columbia,sc
 
another thing to check in ld 60 is ssck 0, stat the clocks to make sure your tracking on a stable loop..

if that;s not the problem do a stat return in 60 and post the results

john poole
bellsouth business
columbia,sc
 
I'd be looking for a new job if I had to ini to get the t-1's up!

JohnThePhoneGuy

"If I can't fix it, it's not broke!
 
He said Reboot, might have meant INI. He Needs to go to school real bad, or hire unemployed tech like me.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
If there is a DCH you have to disable the DCH in LD96
DIS DCH xx
then DISL XX in LD 60
Then you can ENLL XX loop
 
Ace, if you feel like moving to Toronto, were looking for a good PBX tech and your BCM skills would be a bonus!!
 
It's pretty there ,but it's to cold for me.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Put LD 60 in your MIDN.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
most of us would not get away with doing a restart instead of using commands.. if i had a t that went down once a month, i would need to go back to school.. and we have 40 plus including the line side t's..

your right ace, heated seats or not, that ones a little cold this time of year..

john poole
bellsouth business
columbia,sc
 
Yes I am! Last company downsized and then sold it to another company and laying off all HQ staff.

William




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Ace, have you considered going to Nortel directly in Assisted Operate group? I just did a 3 month stint in Hawaii. They wanted me to do more and go with them direct, but my personal life won't let me leave my current employer yet.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top