Oct 19, 2009 #1 tommygun Vendor May 13, 2003 32 US Can i find in programming what the serial number of the switch is and what load is it? Thanks ahead! Tommy Soli Deo Gloria
Can i find in programming what the serial number of the switch is and what load is it? Thanks ahead! Tommy Soli Deo Gloria
Oct 19, 2009 #2 allenmac Technical User Jan 30, 2008 1,513 US LD 22 at the REQ prompt, enter TID<enter> Upvote 0 Downvote
Oct 20, 2009 #3 johnpoole Programmer May 26, 2004 19,375 US btw, that is an old command.. tape id... tapes died in the early 80's in this box.. john poole bellsouth business columbia,sc Upvote 0 Downvote
btw, that is an old command.. tape id... tapes died in the early 80's in this box.. john poole bellsouth business columbia,sc
Oct 20, 2009 #4 allenmac Technical User Jan 30, 2008 1,513 US I worked on a nortel with a tape up to some time in the late 90's. LD 20....... Go outside and smoke, come back in and wait a minute for it to finish loading. Upvote 0 Downvote
I worked on a nortel with a tape up to some time in the late 90's. LD 20....... Go outside and smoke, come back in and wait a minute for it to finish loading.