Option 11 ring type

[Siilver]

Hello,

We have a meridian option 11. we would like to change the ring type on some phones. What is the easiest way to do it??

thanks

 

[PERRYPJ]

CLS
DRG1
DRG2
DRG3
DRG4

OLD ROLMEN WORKING ON NORTELS

 

[Siilver]

hello,

thanks for the fast reply! is there a way to see what is presently assigned to a set?

 

[cweathe]

LD 20
REQ: PRT
PRT: TNB
TNB: 12 0 1 2 (whatever tn is)

enter through till screen starts to scroll... and as classes goes by you, can see what the DRG is set at.

**Or turn on your printer and you can print this information out if it goes by to fast.

 

[cweathe]

I might have goofed on the post. May have to do all of this in LD 11 instead of 20. Been so long since I worked on and 11c, I just do everything from ld 20 now.

 

[johnpoole]

you can still prt and change in 11 or 20. to find the tnb of a set

ld 20
prt
dnb
0
xxxx (with x=to the ext number)

that give you the tn, the tn will show the drg in the cls.. you can change those values in ld 57, but not a easy task

john poole
bellsouth business
columbia,sc