Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Option 11 PRI Programming

Status
Not open for further replies.

WaltNC

IS-IT--Management
Joined
Jan 25, 2007
Messages
94
Location
US
On a Meridian 1 in Load 16 when programming the route data block for a PRI ,for prompt DSEL what determines if VOD or 3VCE is used as a response?
 
3VCE is the right choice, but I'll have to defer "why" to someone else :-)

This is what I've heard:

If you only run VCE, some fax calls will not go through. So use 3VCE

VOD sends some extra info that has always caused problems for me.




~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]
 
I agree. 3VCE is what I always use for PRI and I don't know "why" either.

War Eagle!!
 
Thank you both for your responses.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top