Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Opinion on 7.0

Status
Not open for further replies.
Oct 21, 2004
183
US
I was told that a new version of the pix 506 after 7.0 will let you manage the firewall through a gui web based interface.

For someone who knows nothing about firewalls and still has to call third parties out to work on them would them help me out much?
 
Sorry the new version 7.0 does not support the 506, the plan is that it will be supported in 7.1 released later this year (hopefully).
There is however still the PDM gui which is kinda alright, however i wouldn't mess with such an important device as your firewall if you have no knowledge of basic firewalling/nat/routing principles.

Network Systems Engineer
CCNA/CQS/CCSP/Infosec
Check the danish Cisco CSA Forum here :
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top