OpenScape4000 : Keyset function with call log each line ?

[kritsadadetc]

Hi All,

I have config the OpenScape 4000 (or HiPath 4000) with the Keyset function (Multiline) by command KCSU and working.
And I have just to see that when the incoming call, outgoing and unanswer call to PRIME line then they are entered all in the call log.
But when the incoming call, outgoing and unanswer call to each SECONDARY line then they are entered only incoming and outgoing in the call log, excepted unanswer call.

Could you help me how to do if need the all call log each SECONDARY line ? (incoming call, outgoing and unanswer call)

P.S. also command detail via attachment.

 

[sbcsu]

This MAY or MAY NOT Work but give it a try.

CHA-SBCSU:STNO=3010,CALLOG=ALL;
CHA-SBCSU:STNO=3011CALLOG=ALL;
CHA-SBCSU:STNO=3012CALLOG=ALL;
CHA-SBCSU:STNO=3013,CALLOG=ALL;

Also the other Extensions 3004 && 3009 need it turned on as well

 

[kritsadadetc]

This MAY or MAY NOT Work but give it a try.

CHA-SBCSU:STNO=3010,CALLOG=ALL;
CHA-SBCSU:STNO=3011CALLOG=ALL;
CHA-SBCSU:STNO=3012CALLOG=ALL;
CHA-SBCSU:STNO=3013,CALLOG=ALL;

Also the other Extensions 3004 && 3009 need it turned on as well

Thank you, let me try and feedback you.

 

[kritsadadetc]

This MAY or MAY NOT Work but give it a try.

CHA-SBCSU:STNO=3010,CALLOG=ALL;
CHA-SBCSU:STNO=3011CALLOG=ALL;
CHA-SBCSU:STNO=3012CALLOG=ALL;
CHA-SBCSU:STNO=3013,CALLOG=ALL;

Also the other Extensions 3004 && 3009 need it turned on as well

Dear SBCSU, I changed this parameter CALLOG=ALL and test then still not work.

 

[sbcsu]

Well I don't know so - maybe submit a ticket ?

 

[adibv]

From the "Feature Description" service manual @Chapter "Effect on other features" :

Call log is assigned to the primary line.
Only incoming calls for the primary line are entered.
Outgoing calls are entered in the log of the primary line, regardless of the actual seized line.
Store in Call log of the primary line calls made to secondary lines only when the SDAT parameter LOG2PRIM is set for the primary line.

Additionally have a look on "Feature Usage Examples" service doc @Chapter:
"Display of incoming calls on secondary lines of a keysystem"

 

[kritsadadetc]

@ sbcsu, Thank you again.
@ adibv, Thank you then let me try and will feedback you.