Online Lab

[gwildfire]

I have 6x2500 1x4500 1x2612 1x3620 2x1924 and I want to set it all up so that people can use it remotly like rack time etc, does anyone know how this is done?

 

[lui3]

you will need a public ip address to telnet to and a terminal server configured to console into each of the routers. a 2511 is a good choice since it has 16 async ports on it that can be used to reverse telnet into the hosts.

 

[tecnikall]

Hello there, another thing you can try is to attach a modem to the aux port on the 2511 and from there to reverse telnet into the other devices... Cheers. You will need an octopus cable to connect to the console port of all the other units.... If you need sample config of the modem setup, reverse telnet just let me know. Cheers