Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

One way transmission on T1

Status
Not open for further replies.
Schill13

Schill13

Technical User
Joined
Jan 16, 2006
Messages
43
Location
US
I am experiencing one way transmission on our T1 with D channel. The console operator cannot be heard by the caller. The caller can hear the operator.
 
Sort by date Sort by votes
Is that only to the console, or anywhere, if all calls go there, change NIT1 in CDB and send it to your phone for a test, if you get two-way, reboot the TNBs of the console.
 
Upvote 0 Downvote
No, it is all incoming calls, most calls go to console. Sorry about that.
 
Upvote 0 Downvote
If the problem is only on the consoles, try turning over the 2 prong adaptor that the handsets use to plug into the consoles.
 
Upvote 0 Downvote
All from same provider? dis the D, bounce the T, re-test. Open a ticket with provider.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

lastation4
  • Locked
  • Question Question
Can't get T1 DCH to establish
Replies
6
Views
893
lastation4
lastation4
ashwincjoshi
  • Locked
  • Question Question
Issue with CDP Configuration on Nortel CS1000 - One Number Works, One Doesn't
Replies
1
Views
625
Firebird Scrambler
Firebird Scrambler
lexer
  • Locked
  • Question Question
Tandem trunking on E1 Card
Replies
9
Views
1K
lexer
lexer
Trason
  • Locked
  • Question Question
e911 on rls 7 where to start
Replies
2
Views
782
bignose21
bignose21
finest
  • Locked
  • Question Question
Nortel Ringer/Buzzer while you are on a call
Replies
4
Views
812
finest
finest

Part and Inventory Search

Sponsor

Back
Top