Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
? on DHCP and VLAN
- Thread starter Digum2K
- Start date
Hi there, hope this helps.
1. On the switch port that connects to the router you must enable ISL trunking.
2. Create 2 subinterfaces on the router interface that connects to the switch and enable ISL encapsulation on those.
3. Assign IP addresses to each subinterface. Each subinterface should be in a different subnet.
1. On the switch port that connects to the router you must enable ISL trunking.
2. Create 2 subinterfaces on the router interface that connects to the switch and enable ISL encapsulation on those.
3. Assign IP addresses to each subinterface. Each subinterface should be in a different subnet.
- Status
