Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Off-PBX Feature Name Extension Not Working

Status
Not open for further replies.

ahays

Vendor
Feb 22, 2005
51
US
Software: R016x.03.0.124.0
Patches: 21904, 23947, KERNEL-2.6.18-417.AVI, PLAT-rhel5.3-3021

This feature USED to work in this customer's PBX because I've used it (I have a VPN hardphone extension off of this PBX on my desk at home). EC500 works fine, but the remote FNE features via DID do not work ... as a matter of fact, the log simply goes on and on and on ... Below is an attempt to activate "Call Forward All" via the FNE extension x72639. The DID translations work fine and I can see the number come is as a "feature name extension" in the trace, but all it does is repeat until timeout without activating the feature.

list trace tac 1710 Page 1

LIST TRACE

time data

19:33:06 TRACE STARTED 11/21/2017 CM Release String cold-03.0.124.0-23947
19:33:19 Calling party trunk-group 10 member 105 cid 0x3774
19:33:19 Calling Number & Name XXXXXX4297 HAYS, ALAN
19:33:19 active trunk-group 10 member 105 cid 0x3774
19:33:19 feature name extension 72639
19:33:19 idle trunk-group 10 cid 0x3774
19:33:19 Calling party trunk-group 10 member 173 cid 0x3775
19:33:19 Calling Number & Name XXXXXX4297 HAYS, ALAN
19:33:19 active trunk-group 10 member 173 cid 0x3775
19:33:19 feature name extension 72639
19:33:19 idle trunk-group 10 cid 0x3775
19:33:19 Calling party trunk-group 10 member 49 cid 0x3776
19:33:19 Calling Number & Name XXXXXX4297 HAYS, ALAN
19:33:19 active trunk-group 10 member 49 cid 0x3776
19:33:19 feature name extension 72639
19:33:19 idle trunk-group 10 cid 0x3776
19:33:19 Calling party trunk-group 10 member 39 cid 0x3777
19:33:19 Calling Number & Name XXXXXX4297 HAYS, ALAN
19:33:19 active trunk-group 10 member 39 cid 0x3777
19:33:19 feature name extension 72639
19:33:19 idle trunk-group 10 cid 0x3777
19:33:21 Calling party trunk-group 10 member 171 cid 0x3778
19:33:21 Calling Number & Name XXXXXX4297 HAYS, ALAN
19:33:21 active trunk-group 10 member 171 cid 0x3778
19:33:21 feature name extension 72639
19:33:21 idle trunk-group 10 cid 0x3778
19:33:21 Calling party trunk-group 10 member 103 cid 0x3779
19:33:21 Calling Number & Name XXXXXX4297 HAYS, ALAN
19:33:21 active trunk-group 10 member 103 cid 0x3779
19:33:21 feature name extension 72639
19:33:21 idle trunk-group 10 cid 0x3779
… and on and on and on …


change off-pbx-telephone feature-name-extensions set 1 Page 1 of 2
EXTENSIONS TO CALL WHICH ACTIVATE FEATURES BY NAME
Set Name: Main Location

Active Appearance Select: 72644
Automatic Call Back: 72643
Automatic Call-Back Cancel: 72647
[highlight Yellow]Call Forward All: 72639[/highlight]
Call Forward Busy/No Answer:
Call Forward Cancel: 72640
Call Park:
Call Park Answer Back:
Call Pick-Up:
Calling Number Block:
Calling Number Unblock:
Conditional Call Extend Enable:
Conditional Call Extend Disable:
Conference Complete:
Conference on Answer: 72641
Directed Call Pick-Up:
Drop Last Added Party: 72642


change off-pbx-telephone station-mapping 78095 Page 1 of 3
STATIONS WITH OFF-PBX TELEPHONE INTEGRATION

Station Application Dial CC Phone Number Trunk Config Dual
Extension Prefix Selection Set Mode
78095 EC500 - 1 XXXXXX4297 ars 1

change off-pbx-telephone station-mapping 78095 Page 2 of 3
STATIONS WITH OFF-PBX TELEPHONE INTEGRATION

Station Appl Call Mapping Calls Bridged Location
Extension Name Limit Mode Allowed Calls
78095 EC500 2 both all both




regs,

.al.

Avaya Certified Expert
 
Al,

The FNE codes are for your ec500 cell number to turn features off and on for the related ec500 pbx station.

You must use FNE codes from your cell to affect features that are for your ec500 voice terminal station. You need the forwarding extension destination digits after the code. If the ec500 extension is forwarded, the cancel code should work without destination digits.

What are you dialing for the posted trace? Where is this call originated? (from a cell phone using ec500 on the pbx)

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top