# of heart beats increased before going into LSP mode

[Telecomrookie]

Is there a way I can increase the wait time for a G700/S8300 to go into LSP when the link to the main site is dropped. I have a cutsomer with a point to point RF link and just from the whistle of a little wind the link goes down. I want the S8300/G700 to wait longer before going into LSP mode. Please advise.

Regards,
Telecomrookie

 

[Mitch672]

change system-parameters ip-options"

H.248 MEDIA GATEWAY
Link Loss Delay Timer (min): 5

(change to suite what you need)

Also, in the G700, you will need to set the Primary Search time. You can check it via telneting into the MGP and issuing a "show mgp recovery"

MG-001-1(configure)# show mgp recovery

MGP RECOVERY TIMES
--------------------------------
Primary Search : 1
Total Search : 30
Transition Point: 2

MG-1-001-1(configure)#

You set the Primary Search time via "set mgp reset-times primary-search x" where X is the # of minutes

DB-NYC-G700-1-001-1(configure)# set mgp reset-times primary-search help

set mgp reset-times primary-search command:
-----------------------------------------------------------------------------
Description: Sets the MGP primary search timer
Usage: set mgp reset-times primary-search <minutes>

<minutes> - Number of minutes for the primary search timer.
Values allowed are from 1 to 60.

Example: set mgp reset-times primary-search 15

MG-1-001-1(configure)#

Mitch

AVAYA Certified Specialist