octel to option 81c

[omarrj]

Hello everyone
Does an octel flt-n card connect to the meridian via a t-1 with d-channel to do mwi or is it a card that can emulate digital sets?
thx in advance

 

[janaya]

I think it's a card that emulates digital sets. i upgraded a site that used an Octel and if I remember right, they used that card and had digital sets mounted to the wall in their phone room.

John

 

[johnpoole]

octel had a gray box that had a 2216 without the cover inside, you just give the phone the correct keys and octel software did the rest.. very clean for a secondary intergration..but at that site adds and maint was $$$.. they added 16 channels and paid more then a call pilot would have cost new..

john poole
bellsouth business
columbia,sc

 

[omarrj]

Thanks guys,
I have found out that the octel is a sierra CO vms,I keep getting info (whether true or not) that their is a t-1 octel card that uses isdn from the meridian with d-channel, also does anyone know how many ports are on the flt-n card
thanks in advance

 

[johnpoole]

that would be a 24 port card port 24 would be your dch

john poole
bellsouth business
columbia,sc

 

[omarrj]

so the flt-n is a t-1 card? I can use a t-1 off my op81?
23 channels and a D and this will do my mwi?

 

[johnpoole]

yes a pri will do mwk. you need to look at the rcap prompt, if you have that =to mwk and nd3 will also give you names across the d

john poole
bellsouth business
columbia,sc

 

[johnpoole]

rcap is on your rdb, prt rdb in ld 21, change it in 16

john poole
bellsouth business
columbia,sc

 

[KenMeans]

just fyi a flt-n card is only for a Octel 250 in the 350 it is a PIC-N card and there is a T-1 card but they are not the same