Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Octel 250 monitor

Status
Not open for further replies.

ethereal112

Technical User
Aug 7, 2006
252
US
Our monitor looks like it finally gave out. The monitor cable isnt the standard VGA connection. Is their some sort of gender changer I can purchase to plug in a newer monitor onto the CCF card monitor port? Thanks
 
It uses an RS-232 from the CCF to the Terminal. This is usually a Wyse or VT-100/220 type terminal. You can't use a VGA monitor for that.

We may have some but what you need is a Wyse 55 plus or a Wyse 50 if you can find one.





Ken Means

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)
 
Find an old PC with Procomm on it and connect via the cable to Comm1 on the PC. Set the terminal emulation to Wyse 50 and away you go.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top