Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

O/B calls ringing at reception? MICS power failure

Status
Not open for further replies.

vegasnortel

Vendor
Dec 24, 2001
117
US
This one is very strange, have a MICS 5.0 customer who had power failure over weekend as someone ran into power line at 1:30am sunday. Came in this morning finding all outbound calls from other phones are ringing at receptionist phone only. I was there and verified this, rebooted system and all was working agin well on departure, then just received a call a few hours later reporting same condition. system was on backup, but off so long it depleted and then syetm was down about .5 hours after that before restarting. Any idea's? I am heading back over in about 1 hour.

Thanks in advance to the guru who can help this stumper tech!

Rich
Voice Plus
702-325-5805
 
1.time change ...screwed up service modes...2.t1 not recieving digits and ringing trunks...3.t1 recieving digits but trunks defaulted to operator for prime set...

"There are those who would make you believe there are no choices left.That they have the last word and its final.To those who try the world is wide open choices many.To those who dont only death awaits you.
 
these are all on outbound calls only. service modes are ok and we are receiving all digits and did's from outside system ringing at correct locations.
 
routing

"There are those who would make you believe there are no choices left.That they have the last word and its final.To those who try the world is wide open choices many.To those who dont only death awaits you.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top