Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NTWK 185A

Status
Not open for further replies.

ecarlos

Technical User
Joined
Jan 11, 2003
Messages
5
Location
US
Does anyone have any documentation and/or experience with the NTWK 185A? You install it across the tip & ring leads on pots lines.
 
I have been looking for info on this for a couple years. I know it is a resistor tied to a capacitor.

I have used them to eliminate squeeling between c/o lines when conference calling and also during trunk-to-trunk transfers involving pots lines. I was also told you can use them on a signal feed between a legend and a paging amp to reduce clicking or imbalances during seizure (have not tried this though).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top