Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NTP help for Win2000

Status
Not open for further replies.

dinduboy14

Vendor
Mar 13, 2002
60
AU
Hi guys,

Am trying to install NTP on Windows 2000. i am very new to this so am not sure what should be done. The clock source is the HP55300A gps receiver which would be serially connected to the Win 2000 server. Would have about 8 client machines.

Could someone tell me what shoud be done first.

1) Does Win 2000 Advance Server come with NTP SW pre
installed so should i download it from some where ?
2) Do i have to make a link for the server to the gps
receiver ? (Else how will it know from where the clock
signal is coming from)
3) What should be put in the ntp.conf file? ( i just want
the simplest configuration to see if the NTP is running
or not)
4) How to verify on Windows if the NTP deamon is running and
t verify the time with the gps receiver ?
5) does the NTP software support HP's 55300 gps receiver ?

Many thank for the assistance. regards,Dinesh
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top