NTAK10 (DTI card) disable affecting digital sets

[fadi2008]

Hi,

In an Option 11 Mini system, a DTI card (NTAK10) is installed. This card works very well for some hours before the E1 link went down suddenly. This causes many "Err049" errors on the CallPilot Channels, that leads all the digital sets on this digital card (NTDK16) to stop for about 1 minute, then work normally (Card is overloaded 'Err5112').


Any idea!!!

 

[johnpoole]

sounds like a cpu problem.. one of the few common points between a dig card, the cp and the e1.. a clock could cause that but in the mini, it's on the cpu as well

john poole
bellsouth business
columbia,sc