Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NT5D12 Configuration Error

Status
Not open for further replies.
bizzaro

bizzaro

Technical User
Jul 24, 2002
105
US
I have many NT5D12 (Dual PRI/DTI) cards. All of the configurations on them are configured as PRI w/D-CH. I am trying to configure a spare port on 1 of them as a Tie, but keep getting the following error when configured as trk. I was able to do this on a TMDI in an Opt11C. I am currently working on an Opt81C with Succession 4.5 software. Any ideas?


DLOP 51 24 esf

MODE trk

LCMT b8s

CAUTION: B8ZS/ESF NOT ALLOWED ON QPC472.
YALM



This will work:
DLOP 51 24 esf

MODE pri

LCMT b8s

YALM
 
Sort by date Sort by votes
I want ESF/B8ZS, not AMI. It works fine on an Opt11C TMDI card. Not sure why it won't work on a Dual DTI.
 
Upvote 0 Downvote
Just try entering past that. I think that is just giving you information. I have TRK T1's programmed on NT5D12's all over the place and they work fine.

John
 
Upvote 0 Downvote
That worked! It shows up even with the error.

Thanks!
 
Upvote 0 Downvote
Succession 4 and 4.5 started presenting notes to the commissioners/programmers so that certain hardware issues can be resolved ahead of time.

Just something to keep in mind.

If there is no SCH or ERR message just enter through and continue.

Glad it worked.

John
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top