Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MikeeOK on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NT4 PDC + W2K Server 1

Status
Not open for further replies.

GraqZ

MIS
Apr 22, 2004
2
AU
I have a site which currently runs an NT4 PDC and I am looking at replacing it with a new W2K server box. However, I will most likely need to run them concurrently for a while as there are programs on the NT4 PDC which may not work under W2K.

If I set up the new W2K as a member of the existing NT4 domain, does anyone forsee any problems when I de-comission the NT4 server and move the user accounts to the W2K server? It should only be a case of adding the user accounts to the new W2K server and changing gateway settings for clients, correct?
 
this may help. quoted from
NetBIOS and WINS are required in a mixed network
NetBIOS and WINS name resolution is required only on mixed-mode (Windows 95, 98, Me, NT, 2000 and XP) networks to provide backward-compatibility older versions of Windows. If you have a domain mixed-mode network with DHCP and DNS, you are better to cerate WINS in your system. In workgroup mixed-mode network, most people enable NetBIOS over TCP/IP to resolve NetBIOS name to equivalent to IP addresses. Alternatively, you can install NetBEUI protocol in the clients.



Robert Lin, MS-MVP, MCSE & CNE
Windows, Network, Internet, VPN, Routing and How to at
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top