Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NT1R20BA XOPS

Status
Not open for further replies.
Southpaw46

Southpaw46

MIS
Mar 31, 2004
48
US
I have not programmed one of these on over 10 years and have searched the docs for answer.
I have 2 of these lines from CS1000 to a NEC as incoming lines. the problem is sometimes the NEC does not release/hang up after a call.
the NEC tech wants to know if I'm sending disconnect supervision an I don't know.
here is the TNB and which is the disconnect supervision?
THANKS
TN 116 1 13 06
TYPE 500
CDEN DD
CUST 0
MRT
ERL 00000
WRLS NO
DN 7368 1 MARP
CPND
NAME
XPLN 27
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT
TGAR 8
LDN NO
NCOS 12
SGRP 0
RNPG 266
LNRS 16
XLST 0
SCI 0
SCPW
CLS CTD DTN FBA XFA WTA THFD FNA HTD OPS
LPR XRA AGRD CWD SWD PUA MWD RMMD LPD XHD SLKD CCSD LNA TVD
CFTA SFD MRD C6D CNID CLBD AUTU
ICDA CDMD LLCN EHTD MCTD
GPUA DPUA CFXA ARHA OVDD AGTD CLTD LDTD ASCD SDND
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 LOL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTU
CDMR PRED MCDD T87D SBMD PKCH MPTD ELCD
RCO 0
PLEV 02
PUID
UPWD
AACS NO
MLWU_LANG 0
FTR CFW 4
FTR SSU 0000
FTR PHD
FTR FDN 7369
FTR RDL 16
FTR ADL 4
FTR OSP 1
FTR ISP 75
TIMP 600
BIMP 600
DATE 13 APR 2015
 
Sort by date Sort by votes
There is no disconnect supervision on analog lines out of a CS1000. The only thing you can do is send him a burst of dial tone for a disconnect. In CLS change from LDTD to LDTA.
 
Upvote 0 Downvote
There are also some jumper straps on that card for off Premise applicaitons.
 
Upvote 0 Downvote
I stand corrected, here are some settings to look at



OSP (1) Enable battery reversal answer and


disconnect supervision for outgoing calls
with absolute and assumed answer
indication.
basic-21
OSP 2 Enable battery reversal answer and
disconnect supervision for outgoing calls
with absolute answer indication only.
If the numeric parameter is not entered
and the saved value is null, it is defaulted
to 1. Otherwise, it does not change.


ISP 1-(75)-255 basic-21
Enable hook flash disconnect supervision
with flash timer in 10 milliseconds units. If
the numeric parameter is not entered
and the saved value is null, it is defaulted
to 75 (750
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top